Description
The RAZOR 250 SWF is a powerful workshop machine with MIG, TIG and STICK welding functions. This machine features the added flexibility of a Separate Wire Feeder unit, allowing up to 10m of extra manoeuvrability in the workshop. Built with solid construction, this machine is designed to withstand the toughest conditions. The RAZOR 250 SWF is also Spool Gun and Push-Pull Gun ready, providing MIG welding capabilities across every spool size.
The RAZOR SWF series is designed for superior performance and manoeuvrability, offering the highest quality of welds from UNIMIGâs range.
SEPARATE WIRE FEEDER - Donât get tied down. A separate wire feeder unit lets you remove the wire feeder from the power source up to a distance of 10m. This is perfect for workshops when moving a complete machine isnât an option.
MULTI PROCESS WELDING - This three in one machine, lets you perform MIG, TIG and STICK welding all on one machine. There is also support for both gas shielded MIG and gasless MIG wire. There is no need to swap between machines, saving you time and setup.
FOUR GEARED WIRE DRIVE - This machine features a four geared roller drive unit, providing the most consistent and smoothest wire feed. This also assists with using longer MIG Torches.
SPOOL GUN READY - This machine is Spool Gun ready, so you have the option of attaching a Spool Gun to run softer core wires such as Aluminium MIG wire. The advantage of the Spool Gun is that you do not need to change the setup of your existing torch or drive roller. The spool gun lets you quickly switch over to get the job done with no downtime.
PUSH-PULL READY - Push-Pull Guns provide the smoothest wire speed, especially when MIG welding Aluminium. The âPullâ motor in the torch allows the wire to be fed over a much longer distance, giving you more flexibility to move and manoeuvre whilst MIG welding.
HIGHEST QUALITY WELDS - Offering nothing but the best, this machine has been designed to offer the highest quality welds available from UNIMIG. With superior welding technology, no corners have been cut to make this machine the most powerful in its class.
Specifications
Machine
PRIMARY INPUT VOLTAGE: 240V Single-Phase
SUPPLY PLUG: No plug supplied (32 AMP Recommended)
RATED INPUT POWER (kVA): 12.2
Ieff (A): 28.0
RATED OUTPUT: 30A/15.5V - 250A/26.5V
NO LOAD VOLTAGE (V): 56.5
PROTECTION CLASS: IP21S
INSULATION CLASS: F
POWER FACTOR: 0.72
MINIMUM GENERATOR (kVA): 13.0
DINSE CONNECTOR: 35/50
STANDARD: AS/NZ60974-1
SUITABLE MATERIAL: Mild Steel, Stainless Steel, Cast Iron, Silicon Bronze, Aluminium, Copper
MIG
MIG WELDING CURRENT RANGE: 30-250A
MIG DUTY CYCLE @ 40°C: 35% @ 250A
MIG WIRE SIZE RANGE: 0.6-1.0mm
MIG WIRE SPOOL SIZE: 5kg / 15kg
MIG WELDING THICKNESS RANGE: 1-12mm
DRIVE ROLLER SIZE: 30/22 (x2)
TIG
TIG FUNCTION TYPE: DC Lift Arc
TIG WELDING CURRENT RANGE: 10-225A
TIG DUTY CYCLE @ 40°C: 35% @ 225A
TIG WELDING THICKNESS RANGE: 1-10mm
Stick
STICK WELDING CURRENT RANGE: 10-250A
STICK DUTY CYCLE @ 40°C: 35% @ 250A
STICK ELECTRODE RANGE: 2.5-4.0mm
STICK WELDING THICKNESS RANGE: 2-12mm
Machine Features:
WIRE DRIVE: Seperate 4 Geared
VRD: Yes
SPOOL GUN CONNECTION: Yes
PUSH / PULL GUN CONNECTION: Yes
BURNBACK ADJUSTMENT: Yes
WIRE INCH: Yes
INDUCTANCE CONTROL: Yes
THERMAL OVERLOAD PROTECTION: Over Temperature Warning
Inclusions
RAZOR 250 SWF MIG/TIG/STICK Welder
Separate Wire Feeder Unit
10m Interconnecting Cables
4m SB24 MIG Torch
4m Twist Lock Electrode Holder
300 Amp Earth Clamp & Lead
Twin Gauge Argon Regulator
Operating Manual
