Description
Includes
1 x MAKITA 18V Hammer Drill Skin DHP482Z
1 x MAKITA 18V 1/4inch Impact Driver Skin DTD152Z
2 x MAKITA 18V 3.0Ah Lithium-Ion Battery BL1830B-L
1 x MAKITA 7.2V - 18V Lithium-ion Battery Charger DC18SD
MAKITA 18V Hammer Drill Skin DHP482Z
The new Makita DHP482Z is a compact 18V Hammer Driver Drill to replace its predecessor DHP456Z. Comparing the two models, the new DHP482Z is more compact in size and has a higher fastening torque. The DHP482Z Hammer Driver Drill is designed to suit the needs of all trades people that require a compact 18V tool for drilling and fastening.
Mechanical 2 speed gearing selection switch located at the top of the tool allows high or low speed to be selected
Single Sleeve keyless chuck allows for easy bit installation and removal with one hand
Twin LED Joblight pre glow and after glow function, illuminates more widely then single LED
Compact overall length has been reduced to 198mm increasing the maneuverability of the tool
All metal gear construction increases the durability of the transmission
Ergonomically designed handle has been designed for maximum thrust to the bit with soft grip for comfort
XPT eXtreme Protection Technology encasing the electrical components for increased protection against dust and water
Specifications
Voltage: 18V
Capacities:
Steel: 13mm
Wood: 38mm
Masonry: 13mm
No load speed:
Hi: 0-1900rpm
Lo: 0-600rpm
Impact rate:
Hi: 0-28,500ipm
Lo: 0-9000ipm
Max fastening torque:
Hard: 62Nm
Soft: 36Nm
Length: 198mm
Weight: 1.8kg
MAKITA 18V 1/4inch Impact Driver Skin DTD152Z
One touch bit installation
LED Joblight
Ergonomically designed grip
XPT - eXtreme Protection Technology
Aluminium hammer case
Impact Rate: 0-3,500ipm
Max Fastening Torque: 165Nm
No Load Speed: 0-2,900rpm
MAKITA 18V 3.0Ah Lithium-Ion Battery BL1830B-L
Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
Fast 22 minute charging time
Battery delivers consistent power and run time in extreme temperatures, even in winter (-20°C)
Impact-resistant outer case and shock-absorbing inner-liner are engineered to protect the battery
Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation, even during high-vibration applications
Battery resists self-discharge and remains ready for use even after long periods of storage
Sensitive electronics are protected with a thick gel coating, preventing damage against dust and moisture
Star protection computer controls - includes overload protection, over-discharge protection and over heat protection
The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw
If the battery reaches a certain level of heat it will cut power to the tool, protecting the tool and battery from overheating
MAKITA 7.2V - 18V Lithium-ion Battery Charger DC18SD
Digital power display indicates charging level
More cost effective option
Optimum charging system to maximise cycle life and work volume
Charge Time:
30mins (Compact)
60mins (3.0Ah)
