SH2 FLAME SHAPED BURR 5/16

Bordo 6400-95221 5/16" x 3/4" 1/4" Shank Tungsten Carbide SH-2 Flame Shaped Double Cut Burr

Also referred to as Double Cut Burrs, Express Cut Burrs are general purpose burrs designed for rapid stock removal and improved operator control. Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.

Features:

General purpose burrs designed for rapid stock removal

Improved operator control

Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.

It may be necessary to alter the running speeds from those shown in the speed chart in order to achieve optimum performance

Harder materials require slower running speeds

Smaller burrs require faster running speeds

Long shank burrs require slower speeds for safety reasons

Apply constant movement and light pressure when using the burr

Running below the optimum speed will cause chipping

Running above optimum speed will cause premature tooth wear

Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank

Using tools and collets which have become worn will cause chipping

Do not sink the burr for more than one third of its periphery

Applications:

Carbon steel

Cast iron

High strength steel

Stainless steel

Steel castings

Steel welds

Titanium alloy and

Fibreglass composite

Specifications:

Head Diameter: 5/16"

Flute Length: 3/4"

Overall Length: 2-1/2"

Shank Diameter: 1/4"

Style: SH-2