Description
Bordo 6401-95294 3/8" x 3/4" 1/4" Shank Tungsten Carbide SC-3 Cylindrical Ball Nose Non-Ferrous Cut Burr
Non-Ferrous Cut Burrs are designed for rapid stock removal with minimum chip loading resulting in longer life and reduced clogging.
Features:
Designed for rapid stock removal with minimum chip loading
Longer life and reduced clogging
It may be necessary to alter the running speeds from those shown in the speed chart in order to achieve optimum performance
Harder materials require slower running speeds
Smaller burrs require faster running speeds
Long shank burrs require slower speeds for safety reasons
Apply constant movement and light pressure when using the burr
Running below the optimum speed will cause chipping
Running above optimum speed will cause premature tooth wear
Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank
Using tools and collets which have become worn will cause chipping
Do not sink the burr for more than one third of its periphery
Applications:
Aluminium
Brass
Copper
Bronze
Coarse plastic
Hard rubber
Reinforced plastic and
Fibreglass composite
Specifications:
Head Diameter: 3/8"
Flute Length: 3/4"
Overall Length: 2-1/2"
Shank Diameter: 1/4"
Style: SC-3NF
