Description
SUTTON TOOLS D204-Series Spot Weld Drills are designed for automotive vehicle body repairs. The can be used for quick and precise drilling through existing spot welds, releasing damaged panels and enabling replacements to be fitted.
These drills feature a spur point which is designed to cut through the weld while only leaving a slight mark on the second inner panel.
D204-Series Spot Weld Drills are specifically designed for use with pneumatic tools. They feaures a 60º taper on the shank which suits pneumatic spot weld disconnectors.
Features
Centring Point - Enables accurate positioning and less drilling pressure without work hardening
Shallow Point Design - Cuts through top panel while only slightly marking second panel
Flatted Shank with 60 Taper - For good location in the disconnector
HSS-Cobalt Alloyed - The 8% cobalt formula improves abrasive & heat resistance, for increased strength at higher cutting temperatures
Specifications
Diameter: 8.0 mm
Working Length:
Overall Length: 38 mm
Shank: 8.0 mm Cylindrical with Flat Side
Shank Taper: 60
For use with
Pneumatic Spot Weld Disconnectors
